Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
139
Note 4.
This command is unavailable if the allowable upper limit for the device is exceeded.
The allowable upper limits are as follows.
• Upper limit based on "commands"
64 commands for the entire device.
Up to 64 commands can be set for the entire device, including the "ether macfilter",
"vlan macfilter", "lan ip filter", "ether qos aclmap", "vlan qos aclmap", "lan ip dscp"
commands.
The priority for each command is as follows.
1) "ether macfilter" command
A smaller Ethernet port number has a higher priority among Ethernet ports.
2) "vlan macfilter" command
A smaller VLAN ID has a higher priority among VLANs.
3) "lan ip filter" command
A smaller lan definition number has a higher priority among lans.
4) "ether qos aclmap" command
A smaller Ethernet port number has a higher priority among Ethernet ports.
5) "vlan qos aclmap" command
A smaller VLAN ID has a higher priority among VLANs.
6) "lan ip dscp" command
A smaller lan definition number has a higher priority among lans.
• Upper limit based on "masks"
64 masks for the entire device.
Up to 64 masks can be set for the entire device, including the "ether macfilter", "vlan
macfilter", "lan ip filter", "ether qos aclmap", "vlan qos aclmap", "lan ip dscp", "vlan
protocol" commands.
The priority for each command is as follows.
1) "vlan protocol" commands
2) "ether macfilter" command
A smaller Ethernet port number has a higher priority among Ethernet ports.A
smaller Ethernet port number has a higher priority among Ethernet ports.
3) "vlan macfilter" command
A smaller VLAN ID has a higher priority among VLANs.
4) "lan ip filter" command
A smaller lan definition number has a higher priority among lans.
5) "ether qos aclmap" command
A smaller Ethernet port number has a higher priority among Ethernet ports.
6) "vlan qos aclmap" command
A smaller VLAN ID has a higher priority among VLANs.
7) "lan ip dscp" command
A smaller lan definition number has a higher priority among lans.
The number of masks that each command use depends on applied ACL.
When Multiple ACL are applied, the number of masks amount to sum total, and
depends on ACLs the number of masks amount to less than sum total.