Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Mode and Terminal Operation Commands
334
5.17.1.5 end
Function Return to the operation mode.
Available Model XG0224 / XG0448 / XG2600
Syntax end
Options N/A
Use Mode Configuration mode (admin class)
Explanation Return from the configuration mode to the operation mode.
If the configuration has been changed, the Use Mode returns to the operation mode with
a message.
This command has the same function as the "quit" command.
Default
The Use Mode has returned to the operation mode without reflecting the configuration.
The changed or added configuration remains unchanged.
Check whether you need to reflect the configuration.
Execution Example
5.17.1.6 quit
Function Return to the operation mode.
Available Model XG0224 / XG0448 / XG2600
Syntax quit
Options N/A
Use Mode Configuration mode (admin class)
Explanation Return from the configuration mode to the operation mode.
If the configuration has been changed, the Use Mode returns to the operation mode with
a message.
This command has the same function as the "end" command.
Message
The Use Mode has returned to the operation mode without reflecting the configuration.
The changed or added configuration remains unchanged.
Check whether you need to reflect the configuration.
Execution Example
<WARNING> The candidate-config has been changed but not committed.
(config)# end
#
<WARNING> The candidate-config has been changed but not committed.
(config)# quit
#