Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Mode and Terminal Operation Commands
339
If information is displayed, the following prompt will appear.
If it cannot be displayed backward, the following prompt will appear.
Description:
a: Top line number on screen
b: Bottom line number on screen
c: Total number of lines
d: Number of displayed bytes
e: Total number of bytes
f: Ratio of total number of bytes to number of displayed bytes (d / e x 100)
When a help is displayed, the prompt below will appear following the help. Press the
[RETURN] key. Pressing [CTRL+C] will halt the display of command output.
MORE: help (press RETURN)
Caution When the allowable number of screen lines is less than 3, pager function will not work. In
addition, when the allowable number of screen columns is less than character string
prompt results in a picture distortion.
This command is an operation command; however, the contents specified in the admin
class can be saved as the configuration by executing the "save" command. This
command setting can be deleted using the "delete" command in the configuration mode.
The contents set in the user class are discarded at logout or execution of the "admin"
command, and they cannot be saved.
Default It is assumed that the pager function is not used.
MORE(line 1-22/515 lines, 1428/33473 bytes, 4%):
- -- --- ---- ----- -
a b c d e f
MORE(line 1-22 lines):
- --
a b
terminal pager disable