Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
274
5.15.1.21 snmp user priv
Function Set encryption protocol
Available Model XG0224 / XG0448 / XG2600
Syntax snmp user [<number>] priv <protocol> [<password> [encrypted]]
Options
<number>
•
User definition number
Specify the user definition number with a decimal value from 0 to 7.
The default is 0
<protocol>
Specify the encryption protocol
• none
Specify it when unusing encryption protocol.
• des
Specify when using DES (CBC-DES) as encryption protocol
<password>
Specify encrypted password
• In the case of specifying unencryption password
• In the case of specifying encryption password
Specify the encrypted encryption password shown by show command with "encrypted"
Specify the characters which is shown by show command
encrypted
•
Specify encrypted encryption password
Specify it when specifying encrypted authentication password in <password>
Use Mode Configuration mode (admin class)
Explanation Set the encryption protocol for SNMPv3
Caution Specify authentication protocol when using encryption protocol
Default It is assumed that encryption protocol is not use.
Encryption Protocol Password length
des 8 to 16 characters
snmp user <number> priv none