Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
298
Use Mode Configuration mode (admin class)
Explanation Set the system schedule.
Based on the schedule, the command is executed at the specified time.
Default It is assumed that no schedule information is set.
5.15.6.2 schedule syslog
Function Set the system log in the system schedule.
Available Model XG0224 / XG0448 / XG2600
Syntax schedule <number> syslog <syslog>
Options
<number>
Specify the schedule definition.
• Schedule definition number
Specify a schedule definition number with a decimal value from 0 to 19.
• any
Define by using unused schedule definition number.
<syslog>
•
yes
Specify it when outputting command execution using the system log.
• no
Specify it when outputting command execution without using the system log.
Use Mode Configuration mode (admin class)
Explanation Specify whether or not to write a message, which was output by the command to be
activated in the schedule, to the system log.
This command is enabled only when the command activated in the schedule is specified.
Default It is assumed that no data is output to system log at a command execution.
schedule <number> syslog no