Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
92
5.1.1.3 ether media
Function Sets media type for Ethernet ports.
Available Model XG0224 / XG0448
Syntax ether <number> media <type>
Options
<number>
•
Ethernet port number(s)
Configure Ethernet port number(s) to be used as base 10 value(s).
If configuring multiple port numbers, separate them with a comma.
Use hyphens to specify a range of port numbers. (ex: "1-8")
Refer to the beginning of this chapter for details on how to specify port numbers.
<type>
Media type.
• metal
Use 10/100/1000BASE-T ports (RJ45)
• fiber
Use SFP Ports.
*The 100BASE-FX module can be used by XG0224 / XG0448.
• auto
Automatically selects media type.
*However, if both Ethernet and SFP ports are connected the SFP ports are used.
Use Mode Configuration mode (admin class)
Explanation Sets the type of media to be used by the Ethernet port.
Caution
•
If auto is selected and cables are connected to 10/100/1000BASE-T ports as well as to
SFP ports, the SFP ports will be selected.
• Similarly, with the auto setting, if 10/100/1000BASE-T port(s) are in a link up state and
SFP slot(s) are put into a link up state by connecting a cable to them, operation
changes to the SFP slot(s) and the 10/100/1000BASE-T port(s) change to a link down
state.
• Use the fiber setting if using the 100BASE-FX module.
(The 100BASE-FX module cannot be used with the auto setting.)
Default If unset, automatic selection of media type will be the default.
Range Model
21 to 24 XG0224
45 to 48 XG0448
ether <number> media auto