Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
LACP Counter, Log, Statistics, and Status Display and Clear Operation
Commands
421
5.22.1.2 show lacp statistics
Function Display the LACP statistics.
Available Model XG0224 / XG0448 / XG2600
Syntax show lacp statistics
Options
N/A
Display all statistics.
Use Mode Operation mode (user class/admin class)
Configuration mode (admin class)
Explanation Display the LACP statistics.
Caution The statistics are cleared if the device is restarted or the valid LACP definition is not
found in the device.
The item is not displayed if its counter is zero (0). If the LACP is not operating on a port,
the item is displayed when its counter is not zero.
Execution Example
1) Port number
2) Number of sent lacpdu packets
3) Number of received lacpdu packets
4) Number of times the aggregation link is disabled, changing from the enabled state,
to send or receive packets
5) Number of times the aggregation link is disabled to send or receive packets
6) Number of times the lacpdu packet reception was timed out
7) Number of times the marker pdu packet was sent
8) Number of times the marker pdu packet was received
9) Number of lacpdu or marker pdu packets received when the LACP was disabled
10) Number of times the packet sending has failed
11) Number of times the packet reception has failed
# show lacp statistics
LACP statistics information:
[ETHER PORT-1] --- (1)
45 transmitted lacpdu --- (2)
46 received lacpdu --- (3)
12 start collecting/distributing --- (4)
13 stop collecting/distributing --- (5)
5 receive timeout lacpdu --- (6)
1 transmitted marker pdu --- (7)
1 received marker pdu --- (8)
21 received lacpdu no link --- (9)
1 transmission error --- (10)
1 received error --- (11)
[ETHER PORT-3]
53 transmitted lacpdu
52 received lacpdu
4 start collecting/distributing
3 stop collecting/distributing
#