Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
312
5.15.8.21 serverinfo ssh ip6
Function Set the IPv6 SSH login server function
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo ssh ip6 <mode>
Options
<mode>
•
on
Enable IPv6 SSH login server function
• off
Disable IPv6 SSH login server function
Use Mode Configuration mode (admin class)
Explanation Set whether or not to enable the IPv6 SSH login server function.Setting this command
Off and the "serverinfo sftp ip6" command Off will reject a connection request using the
IPv6 address from the ssh client. Setting this command Off and the "serverinfo sftp ip6"
command On will reject a connection request using the IPv6 address from the ssh client
after the password was entered.
Caution Enabling this command generates an SSH host authentication key at device power-on
and execution of the "reset" command, and it takes several tens of seconds to several
minutes for the processing time. ssh connection is enabled after the SSH host
authentication key generation was completed.If this device has been started to enable
this function while all the ssh and sftp functions were Off, it also takes several tens of
seconds to several minutes for the processing time to generate an SSH host
authentication key. Note that other processes may be affected; session monitoring
timeout may occur, for example.
Default It is assumed that the IPv6 SSH login server function is enabled.
serverinfo ssh ip6 on