Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
108
5.1.1.18 ether downrelay recovery cause
Function Set the target parameters for releasing the offline state on the Linkdown Relay function of
the Ethernet port.
Available Model XG0224 / XG0448 / XG2600
Syntax ether <number> downrelay recovery cause <cause>
Options
<number>
•
The Ethernet port number
Set a port number to use with a decimal value.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
<cause>
Specify the offline parameters targeted for releasing the offline state of linked port from
the following.
• downrelay
Specify when offline parameters with the Linkdown Relay function are targeted for
release.
• all
Release all the parameters offline states.
Use Mode Configuration mode (admin class)
Explanation Set the offline parameters targeted to releasing offline state lead by linkup when "auto"
was specified on "ether downrelay recovery" command.
Set the parameters assigned for releasing of offline state during the releasing operation.
Caution
•
This command is enabled only when "auto" is specified in "ether downrelay recovery
mode" command. The definition is ignored when "manual" is specified.
• The offline state is released without depending on this command definition when the
"online" command in the linked port is executed, or during dynamic definition change
accompanied by releasing of the offline state.
Default It is assumed that "downrelay" was specified for the target parameters of offline state
release of the linked port list.
ether <number> downrelay recovery cause downrelay