Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
285
5.15.2.9 syslog source address
Function Set the source IP address of the system log information.
Available Model XG0224 / XG0448 / XG2600
Syntax syslog source address <address>
Options
<address>
Specify the source IPv4 address that is used for sending the system log information.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Use Mode Configuration mode (admin class)
Explanation Specify the source IPv4 address that is used for sending the system log information.
If the IPv4 address is not set, the IPv4 address of the sending interface is used.
Default It is assumed that use the IPv4 address of the sending interface in used.