Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
326
5.15.8.44 serverinfo time filter
Function Set the application filter for the TIME server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo time filter <count> <action> acl <acl_count>
Options
<count>
•
Filtering definition number
Specify a definition number, which indicates a filtering priority, with a decimal value
from 0 to 29.
A smaller value has a higher priority.
<action>
Specify an operation when filtering conditions are satisfied.
• accept
Transmit the relevant packet.
• reject
Block the relevant packet.
<acl_count>
•
ACL definition number
Specify the required ACL definition number with a decimal value.
If the ACL specified in <acl_count> is not specified, the filtering definition will be
disabled and ignored.
The following ACL definition is available for application filtering.
• ip
Set only the source IP address and the number of mask bits.
If the ip value is not set, the filtering definition will be disabled and ignored.
Use Mode Configuration mode (admin class)
Explanation Set the application filter for the TIME server function.
Default It is assumed that the application filter is not set for the TIME server function.
5.15.8.45 serverinfo time filter move
Function Change the priority of the application filter for the TIME server function.
Available Model XG0224 / XG0448 / XG2600
Syntax serverinfo time filter move <count> <new_count>
Options
<count>
•
Target filtering definition number
Specify a filtering definition number of which the priority is to be changed.
<new_count>
•
Destination filtering definition number
Specify a new priority for <count> with a decimal value from 0 to 29.
If any definition with the same definition number exists, it will be inserted before the
existing one.
Use Mode Configuration mode (admin class)
Explanation Change the priority of the application filter for the TIME server function.