Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Routing Table Entry Display Commands
437
1) FP
The kernel flag and the protocol type are displayed.
The following shows the kernel flags that may be displayed.
* : Indicates the route registered in the IPv6 kernel.
Blank : Indicates the route not registered in the IPv6 kernel.
The following shows the protocol types that may be displayed.
RA : Indicates default route by receiving Router Advertisement (RA).
S : Indicates static route information.
C : Indicates the interface route information.
2) Destination/Prefixlen
The destination IPv6 network address and the Prefix length are displayed.
IPv6 link-local addresses are not displayed.
3) Gateway
The gateway address is displayed.
If the default route by receiving Router Advertisement (RA) is not registered in
the IPv6 kernel, the gateway address is not displayed.
4) UpTime
The elapsed time after the last update of route information is displayed.
01:23:45 : 1 hour, 23 minutes and 45 seconds have passed (if the elapsed
time is within 24 hours).
6d23h45m : 6 days, 23 hours and 45 minutes have passed (if the elapsed
time is within 7 days).
3w6d23h : 3 weeks, 6 days and 23 hours have passed.
5) Distance
The routing priority is displayed.
6) Interface
The interface name through which the gateway can be reached is displayed.
If status of the interface is invalid, its name is followed by (inactive).
If the default route by receiving Router Advertisement (RA) is not registered in
the IPv6 kernel, the interface name is not displayed.