Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Bridge Counter, Log, Statistics, and Status Display and Clear Operation
Commands
464
(Continued)
1) Bridge priority
The bridge priority used for the bridge identifier of this device is displayed.
2) MAC address
The MAC address used for the bridge identifier of this device is displayed.
3) Configuration BPDU send interval
The configuration BPDU send interval (in seconds) is displayed.
4) Maximum wait time
The maximum wait time (in seconds) of configuration BPDUs is displayed.
5) Maximum forwarding delay time
The maximum forwarding delay time (in seconds) is displayed.
6) Priority of root bridge
The priority of the root bridge is displayed.
7) MAC address of root bridge
The MAC address of the root bridge is displayed.
Other statistics:
changed to forwarding state 1
---
(37)
eth2 is Forwarding Port Version 0(STP) STP-Compatible(-)
------------------ ------------------- -----------------
(10) (11) (36)
Port path cost 200000(auto), Port priority 128, Port Identifier 128.2
--------------------------- ----------------- ----------------------
(12) (13) (14)
Port role is Designated
-----------------------
(15)
Designated root has priority 32768, address 00:00:e2:08:57:89
---------------------------------- -------------------------
(16) (17)
Designated bridge has priority 32768, address 00:0b:5d:89:00:aa
------------------------------------ -------------------------
(18) (19)
Designated port id is 128.2, Designated path cost 20000
--------------------------- --------------------------
(20) (21)
BPDU statistics:
Config BPDU: sent 902, sent error 0
--------- ------------
(22) (23)
received 0, discarded 0
------------- -----------
(24) (25)
TCN BPDU: sent 0, sent error 0
------ ------------
(26) (27)
received 0, discarded 0
---------- -----------
(28) (29)
Other error: bad protocol 0, bad version 0
-------------- -------------
(30) (31)
bad BPDU type 0
---------------
(32)
Other statistics:
Changed to forwarding state 1
---
(37)