Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Device Information Settings
264
5.15.1.5 snmp agent address
Function Set the SNMP agent address.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp agent address <address>
Options
<address>
•
Agent address
Set the agent address of this device.
Specifying 0.0.0.0 will delete the SNMP agent address.
The allowable range is as follows:
1.0.0.1 to 126.255.255.254
128.0.0.1 to 191.255.255.254
192.0.0.1 to 223.255.255.254
Use Mode Configuration mode (admin class)
Explanation Set the SNMP agent address. This setting is also used for the local address at trap
transmission.
Make sure to set it when using the SNMP agent function.
Default It is assumed that the agent address is not set. The local IP address of trap packet is
undefined.
5.15.1.6 snmp agent engineid
Function Set a SNMP engine ID name.
Available Model XG0224 / XG0448 / XG2600
Syntax snmp agent engineid <engineID>
Options
<engineID>
• SNMP engine ID
Specify a SNMP engine ID with up to 27 characters.
Use Mode Configuration mode (admin class)
Explanation Set a SNMP engine ID under SNMPv3. In this device, the SNMP engine ID is as follows.
• When setting this command;
Octets 1 to 5: 0x800000d304 fixed
Octet 6 and above: Engine ID set in this command
• When not setting this command;
Octets 1 to 5: 0x800000d304 fixed
Octet 6 and above: Random value
Default A SNMP engine ID is generated automatically.