Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
Port Information Settings
116
5.1.1.26 linkaggregation downrelay port
Function Set the linked port list information about the linkaggregation Linkdown Relay function.
Available Model XG0224 / XG0448 / XG2600
Syntax linkaggregation <group> downrelay port <portlist>
Options
<group>
•
Link aggregation group number
Set a link aggregation group number with a decimal number.
<portlist>
•
Relay port list
Set a list of the Ethernet ports that places the linked port offline (linkdown) by linkdown
where this definition has been set.
When setting multiple port numbers, separate them with commas (,).
When setting sequential numbers, separate them with hyphens (-). (Example: "1-8")
Use Mode Configuration mode (admin class)
Explanation If a linkdown occurs in the linkaggregation set with this definition, set a list of the Ethernet
ports that will also linkdown (port linkdown).
If a linkdown relay operation occurs, its linked port goes to an offline state, and a system
log is output.
Caution
•
If ports are offline, release them with the "online" command in port releasing.
• The definition is applied normally even if a port set with linkaggregation is included on
the relay operation port list.
• When the Ethernet port type is a linkaggregation port, and this definition is set in the
linkaggregation settings, this definition becomes enabled and the Linkdown Relay
function is ignored.
• The linked port does not change to offline status during the dynamic definition change
Linkdown operation on the Ethernet port where this command is set.
Default The Linkdown Relay function is not executed, assuming that port list information has not
been set.
Range Model
1 to 13 XG0224
1 to 26 XG0448
1 to 10 XG2600