Filter
Top Products
XG Series User's Guide
16
Organization and Usage of This Manual
This section describes target readers, contents, notations, etc. of this guide.
Target Readers and Required Knowledge
This guide was written for administrators, who are in charge of network construction, maintenance, and management.
To use this guide, the following knowledge is required.
• Basic knowledge of networks, the Internet, and intranets
• Basic knowledge of system security
This guide omits explanations of network protocol terms.
Areas Covered
This guide to the XGseries is composed of the following chapters.
About the Symbols
The symbols used in this guide have the following meanings.
Chapter Titles Contents
Chapter 1 Features and Functions Describes the features and functions.
Chapter 2 Using the CLI Describes operating environment of CLI and how to operate CLI.
Chapter 3 Installation Describes the necessary installation procedures.
Chapter 4 Switch Functions and their
Configuration
Describes how to use the console screen.
Chapter 5 Command Reference Describes how to use the commands.
Chapter 6 Managing the Device Describes the management of the device.
Chapter 7 Troubleshooting Describes how to solve problems in the device.
Appendix A SNMP Traps Describes message format of SNMP traps.
Appendix B List of MIBs Describes the list of MIBs supported by the SNMP agent
Indicates useful information for using this device.
Indicates precautions that must be taken when using this device.
Indicates additional information to complement operating instructions.
Indicates related matters such as operation procedures, etc.
Indicates the available model name when using functions of this device.
Indicates warning matters related to the Product Liability (P.L.) Law. Please follow them
when using this device.
Indicates cautionary notes related to the Product Liability (P.L.) Law. Please follow them
when using this device.
Hint
Precautions
Note
Reference
AvailableModel
W arning
Caution