Filter
Top Products
XG Series User's Guide Chapter 5 Command Reference
LLDP Information Settings
225
5.9 LLDP Information Settings
This section explains about Loop Detection information settings.
5.9.1 LLDP Information
This section explains about the commands related to LLDP Information.
5.9.1.1 lldp send interval
Function Set LLDP send interval
Available Model XG0224 / XG0448 / XG2600
Syntax lldp send interval <interval> <delay>
Options
<interval>
•
LLDP send interval
Specify LLDP send interval with a decimal value with h (hours), m (minutes), s (seconds)
It can be specified from 5 seconds to 32768 seconds.
This setting corresponds to msgTxInterval in 802.1AB
<delay>
•
LLDP send miimal interval
Specify LLDP send minimal interval with a decimal value with h (hours), m (minutes), s
(seconds) It can be specified from 1 second to 0.25 x <interval>seconds (Max is 8192 sec).
This setting corresponds to TxDelay in 802.1AB
Use Mode Configuration mode (admin class)
Explanation Specify LLDP send interval which this device sends LLDP information periodically with
and LLDP send minimal interval which this device sends LLDP information when LLDP
information is changed
Default It is assumed that 30sec is set for LLDP send interval and 2sec is set for LLDP send
miimal interval.
lldp send interval 30s 2s