Filter
Top Products
4 - 25
Project name QEX6
Program name MAIN
Ladder example
Create the following ladder with GX Works2 and write it to the CPU of the
demonstration machine. Then check that the FEND instruction operates properly.
X3
Y70
X4
FEND
Y72
X5
0
3
5
6
P10
CJ
P10
Operating Procedure
The following procedures are the same as the
Operating Procedure
in section
4.4.
(1) Creating a new project
(2) Creating a program
(3) Writing the project to the programmable controller
(4) Monitoring the ladder