Filter
Top Products
6 - 2
6.1.1 Turning on and off the device "Y" forcibly
Stop the CPU before this operation.
1) Click [Debug] → [Modify Value].
1) Click!
2) Enter "Y70"!
3) Click!
2) The Modify Value dialog box is displayed.
Enter "Y70" in the "Device/Label" list box.
3) Click the ON
or OFF button to turn
on or off "Y70" forcibly.
Check with demonstration machine
1) Confirm that the on and off statuses on the Execution Result area switches
according to the clicking of the ON
or OFF button. Also, confirm that
the LED of Y70 on the demonstration machine turns on and off according to the
operation.
NOTE
When the CPU is in the RUN state, the operation results of programs are
displayed preferentially. Therefore, stop the CPU first before the confirmation
with the demonstration machine.