Filter
Top Products
5 - 24
Operation Practice
Write the program on the previous page to the CPU, then run the CPU.
Follow the procedures below to execute the device batch monitoring. The
contents of D0 to D47 can be monitored.
Write the program to the programmable controller
Click [Online] →
[Monitor] → [Device/Buffer Memory Batch].
Enter "D0" in the Device/Buffer Memory Batch Monitor dialog box and press the
Enter
key.
Click the Display Format
button and select "Word Multi-point" for Monitor
Format.
→ Click the OK
button.
[Monitor screen]
1) Turn on X3.
The numeric data 365 is
sent to eight registers of D0
to D7 in batch.
2) Turn on X4.
The numeric data 7000 is
sent to 16 registers of D8 to
D23 in batch.
3) Turn on X5.
The contents of the 16
registers of D0 to D15 are
sent to the 16 registers of
D32 to D47 in batch.
4) Turn on X6.
"0" is sent to the all 48
registers of D0 to D47 in
batch. This means that all
the 48 registers are cleared.