Filter
Top Products
7 - 13
(From the previous page)
6) Double-click!
6) Double-click Switch Setting.
7) Set!
8) Click!
7) The Switch Setting screen is displayed.
Set Input range for CH1 to "0 to 10V".
8) Click the OK
button.
9) Double-click!
9) Double-click Parameter.
10) Set!
10) The Parameter screen is displayed.
Set "A/D conversion enable/disable setting" for CH2
to CH4 to "1:Disable". (Only CH1 is used.)
(To the next page)