Filter
Top Products
2 - 32
2.5 Creating Ladder Program
2.5.1 Creating a ladder program using the function keys
Follow the steps below to create the ladder program
as shown on the left.
1) Press the
F5
key to open the Enter Symbol
window. Enter "X2".
If any other key is pressed by mistake, press the
Esc
key and retype.
2) Press the
Enter
key to confirm the entry.
• The OK or Exit button also can be used to confirm
or cancel the entry.
3) The entered symbol (
X2
) is displayed.
4) Press the
Shift
+
F5
keys , and enter "X0".
5) Press the
Enter
key to confirm the entry.
X2
Y70
X3
X0
Y70
Y71
A ladder program to be created
3) The symbol is displayed!
4) Enter "X0"!
5) Press "Enter"!
6) The symbol is displayed!
7) Enter "Y70"!
8) Press "Enter"!
1) Enter "X2"!
2) Press "Enter"!
(To the next page)
6) The entered symbol (
X0
) is displayed.
7) Press the
F7
key, and enter "Y70".
8) Press the
Enter
key to confirm the entry.