Filter
Top Products
2 - 39
(2) Reading data from the CPU
1) Click!
1) Click
on the toolbar or click [Online]
→ [Read from PLC].
2) Select a program to be
read by clicking on data!
2) Select the
target memory!
3) Click!
2) From the "PLC Module" tab, click to select the
program and parameter to read from the CPU. Or
click Parameter + Program
to select the target
program and parameter.
Select "Program Memory/Device Memory" for
"Target Memory".
3) Click Execute to accept the selection.
4) Click!
4) If a parameter or program exits, the confirmation
dialog box for overwriting the data is displayed.
Click Yes
.
6) Click!
5) The progress dialog box is displayed.
6) The message "Completed" is displayed when the
reading is completed. Click Close
.