Filter
Top Products
6 - 34
(From the previous page)
8) Click!
7) Enter item and set!
7) The Detail Setting - Trigger Condition dialog
box is displayed. Set the following items.
In this example, set error occurrence as
trigger condition.
Device/Label : SM0
Condition : -P-
8) Click the End Setting
button.
9) The Detail Setting - Trigger Condition dialog
box disappears. Click the End Setting
button to close the Trace Setting dialog box.
11) Check!
10) Set devices to be traced on the Sampling
Trace screen as shown on the left.
11) Check the check box to display the trend
graph of SD0.
12) "SD0" is displayed in the trend graph area on the Sampling Trace screen.