Filter
Top Products
2 - 25
2.4 Preparation for Starting Up CPU
Setting switches and formatting the built-in memory are required before writing a
program to the CPU.
Connect or set the connectors and the switches of (1) to (3) shown below.
(The figures below are example of Q06UDHCPU.)
Q06UDHCPU
(2)
(3)
(1)
(1) Connecting a battery
Connect the battery since the lead wire of the battery connector is disconnected
at the factory shipment.
(2) Setting the switches
Set the RUN/STOP/RESET switch to the STOP position.
(3) Connecting the USB cable