Filter
Top Products
3 - 4
Item Description
Boot option Sets whether to clear the program memory when booting up.
Boot file
Boot file setting
Sets the type, data name, transfer source drive, and transfer destination drive of the boot
file.
Program
Sets the file name and execution type (execution condition) of the program when several
programs are written to the programmable controller CPU
SFC
Sets the startup mode and startup condition of an SFC program and the output mode at
block stop
Device points Sets the number of points used for each device of the programmable controller CPU.
Latch (1) start/end
Sets the latch range (start device number/end device number) clearable with the
RESET/L.CLR switch or a remote latch clear operation.
Latch (2) start/east
Sets the latch range (start device number/end device number) not clearable with the
RESET/L.CLR switch or a remote latch clear operation.
Local device start/end Sets the range (start device number/end device number) of devices used as a local device.
File register extended
setting
Sets the extended data register and extended link register. (Only for Universal model
QCPU)
Device
Indexing setting for ZR
device
Sets the start number of Z to be 32-bit indexed, or use the index register ZZ for 32-bit index
setting. (Only for Universal model QCPU)
I/O assignment
Sets the type, model, number of occupied I/O points, and start I/O number of each module
mounted on the base unit.
I/O assignment
Basic setting
Sets the model and the number of slots of the base unit, the model of the power supply
module, and the model of the extension cable.
No. of PLC Sets the number of programmable controller CPUs used in the multiple CPU system.
Operation mode
Sets the operation mode of the multiple CPU system when a stop error occurs in any of the
programmable controller CPU No. 2 to No. 4.
Host station Sets the CPU number for the host CPU.
Multiple CPU synchronous
startup setting
Selects the CPU modules to be started up synchronously.
Online module change Sets whether to allow the online module change in the multiple CPU system.
I/O sharing when using
multiple CPUs
Sets whether to retrieve the I/O status of the I/O module or intelligent function module
controlled by other programmable controller CPUs.
Communication area setting
(refresh setting)
Sets the CPU shared memory to enable data sharing among multiple CPUs.
Multiple CPU
setting
Multiple CPU high speed
transmission area setting
Sets the user setting area, auto refresh, assignment confirmation, and system area.
IP address setting Sets the IP address and the input format of the IP address.
Communication data code Selects the Binary code or ASCII code for communication.
Open setting button Sets the protocol, open system, and host station port number.
FTP setting button Selects whether to use the FTP function
Built-in
Ethernet port
setting
Time setting button Sets whether to use the SNTP function and the timing of setting the time.
Transmission speed Sets the transmission speed.
Sum check Sets the sum check.
Transmission wait time Sets the transmission wait time.
PLC parameter
Serial
communication
Online change Sets whether to allow the online program change.
Ehternet/CC IE/MELSECNET
Sets the network parameters for Ehternet, MELSECNET/10, MELSECNET/H, and CC-Link
IE controller network.
Network
parameter
CC-Link Sets the parameters for CC-Link.
Remote password Sets the password that limits the access via the Ethernet or serial communication modules.