Filter
Top Products
120 Chapter 18 Configuring telephones: Digital telephones
N0060600N0060600
Digital telephone DN record overview
Prerequisites
Ensure the following has occurred before you start this procedure:
Using the DN panels
On each panel on the DNs list, add or modify settings to customize the telephone operations.
For a detailed description of the fields on each panel, refer to “DN records parameters” on page 41.
Modules are installed, and you understand which ports and DNs can be assigned
to your telephones.
Lines and routes programming are created for dialing the local PSTN. Target lines
are created where required by the type of trunks you are using. Note: The line
must be configured as supervised/guarded. Refer to “Properties” in the BCM 4.0
Networking Configuration Guide (N0060606).
Appropriate restriction filters are created to allow or disallow out-dialed calls. (“Call
Security: Restriction filters” in the BCM 4.0 Networking Configuration Guide
(N0060606))
Telephony system features have been programmed, and you understand which
features are not available to all users. (“Global telephony settings” on page 71)