Filter
Top Products
240 Chapter 27 Display prompts and messages
N0060600N0060600
No calls waiting
You tried to use Call Queuing but no call was ringing at your telephone.
SWCA: The
FEATURE *537 or FEATURE *538 request was used, but there
are no calls parked on any of the assigned buttons on your telephone.
No free lines
All the lines or line pools available to the telephone are in use. This prompt also
appears when you try to dial an external number, or use a feature that conflicts with
the lines, line pools, or prime line used by the telephone. Your installer must correct
this situation.
No last number
You have not dialed an external telephone number since the last power interruption
or system reset.
No line to use
Line redirection: You have one external line on your telephone, but you need a
second line to perform line redirection. Redirect your external line using a line pool as
the outgoing line.
No line selected
Auto dial or Speed dial: The telephone is set up to dial an external number on a
prime line, but the telephone does not have a prime line. Your installer must correct
this situation.
No line selected
There is no call ringing at your telephone. If you have a flashing line button, but your
telephone is not ringing, press the line button to answer the call on that line.
No number saved
Saved number redial: You have tried to save the number of an incoming call. You
can only save numbers that you have dialed.
No number stored
Speed dial: There is no number stored on the speed dial code you have dialed.
Message: No number programmed for the message center. Contact your voice
messaging service provider.
No voice call
Voice call: The telephone receiving the call cannot accept voice calls for one of the
following reasons:
• The telephone is active or ringing with another call.
• Call Forward is on.
• Do Not Disturb is on.
• Voice Call Deny is on.
• It is not a BCM telephone.
• Your call continues as a normal ringing call.
Not available
You tried to use a feature that is currently not available from your system.
Transfer: The telephone where you directed a call is not in service or is or
unavailable. The call returns to your telephone.
Not HG member
Observe
Silent monitor: The DN you entered is not a Hunt Group member. Press Observe
to enter another hunt group telephone.
Not in service
Call forward: Two or more telephones are linked in a forwarding chain, and one is out
of service or used for programming.
Not in service
CANCL RETRY
Transfer: The telephone to which you are trying to transfer a call is out of service.
Not in service
CALLBCK
Camp-on: The telephone to which you have camped a call is out of service or is used
for programming. The call has returned to you. Press
CALLBCK or the line button to
reconnect to the call. On 7000 and 7100 digital phones, lift the handset to reconnect
with the call.
Not in Service
Observe
Silent monitor: The DN you entered did not respond to the system. Press Observe
to enter another hunt group telephone.
Display prompt Description of error or action