Filter
Top Products
98 Chapter 13 Creating ring groups
N0060600N0060600
Figure 36 Ring Group lines
Table 33 describes the headings on both these panels.
Also refer to:
• “Configuring scheduled service” on page 31
Table 33 Ringing group schedule line values
Attribute Value Description
Lines Settings tab:
Line XXX This list includes all analog and digital lines plus the target lines (PRI and
VoIP lines). Program only those that are active on the system.
Line Settings panel:
Schedules <read-only> You only need to configure the schedules that you use for your system.
Ring Group Ring Group <XXX> Type in a ring group number (001-100).
Only one ring group can be assigned to a line for each schedule. To combine
groups of ringing sets, you must create a new Ring Group that contains all the
sets you want to ring, and assign it to the line.
Aux. Ringer <check box> This variable indicates whether the auxiliary ringer (if installed) also rings
when Ringing service is on.
Tips:
• The default ringing telephone is 221 (Start DN). This means that all lines
ring at telephone 221 when Ringing service is on.
• If you have an auxiliary ringer programmed to ring for calls on an external
line, and you transfer a call on that line without announcing the transfer,
the auxiliary ringer rings for the call transfer.