Filter
Top Products
86 Chapter 10 Configuring system speed dial numbers
N0060600N0060600
Figure 31 System Speed Dial table
Table 31 describes each field on this panel.
Table 31 System Speed Dial (Sheet 1 of 2)
Attribute Values Description
Number of speed
dials
70
255
Choose the number of speed dial codes you want available to your
system users.
If you are using alpha tagging, you can choose the larger list to
accommodate your incoming call requirements. Also refer to “Using
alpha tagging for name display (incoming)” BCM 4.0 Networking
Configuration Guide (N0060606).
CLID match length <3-8>
None
Indicate the number of digits, starting from the right of the dial
string, that the system needs to match between an incoming call
and a system speed dial listing to prompt the alpha tagging display.
When a match is made, the system provides a name or number
display for any calls coming in over analog lines that allow number
CLID.
Also refer to “Using alpha tagging for name display (incoming)”
BCM 4.0 Networking Configuration Guide (N0060606).
Default: 8
System Speed Dials table
Speed Dial
Number
<001-070 or 001-255> Displays dial codes for the System Speed Dial list.
External Number <dial string (max. 24
digits)>
Displays the number the system dials when the code is entered.
Remember to include required destination codes.