Filter
Top Products
38 Chapter 5 System features and feature codes
N0060600N0060600
71 Link Activates the Link command, which allows the user to access special
features on a remote PBX system.
74 Call park Allows the user to park a call.
*520 Find available SWCA key System searches for a free SWCA key among the SWCA keys that are
assigned to the current telephone.
*521 to *536 System Wide Call
Appearance (1 to 16)
Non-intercom calls are associated with an available SWCA key when the
call is answered, originated, or placed on Hold.
Features that interact with this feature: Hold, telephone keys, outgoing
and incoming calls.
*537 Find oldest SWCA call System searches among the SWCA keys assigned to the telephone, and
unparks the call that has been parked the longest.
*538 Find newest SWCA call System searches among the SWCA keys assigned to the telephone, and
unparks the most recently parked call.
*550 Silent monitor Allows the user to monitor hunt group calls. (Telephone must be
assigned with SM supervisor.)
75 Group pickup Allows the user to answer a call ringing telephone within the Pickup
group.
76 Directed pickup Allows the user to answer any ringing telephone within the same system.
77 Call timer Allows the user to see the call duration timer.
78 Pause Allows the user to insert a pause during a dialing sequence.
79 Exclusive hold Allows the user to place a call on hold at the current telephone. All
appearances of the call on other telephones indicate the line is busy.
800 Trunk answer Allows the user to answer a ringing line while in a ringing service. (If
enabled).
801 Call queuing Allows the user to answer calls in order when several calls arrive in rapid
succession. Calls are presented in this order: incoming calls, timed-out
forwarded calls, then camped calls.
802 Group listening Activates the speaker on the set to allow a group of people to hear a call.
But the user must talk to the caller through the handset.
803 Time Briefly displays the current time.
804 Wait for dialtone Places a pause in a dialing string that holds the following digits until a
dialtone is perceived on the line.
806 Static date and time First line displays the date and time.
807 Ringing (Signal) call Directly rings another telephone inside the system when an extension is
entered after the feature is selected. This is the same process as
pressing an intercom button and dialing an extension.
808 Long tones Allows the user to send long DTMF tones.
811 Call information Allows the user to view information about a current call.
812 Call log - view
information
Allows the user to view call log information.
813 Call LogIt Allows the user to add the current call to the call log manually.
Table 7 Button Programming Feature settings (Sheet 2 of 4)
Set command
(FEATURE
<code>)
Feature Description