Filter
Top Products
29
BCM 4.0 Device Configuration Guide
Chapter 4
System schedule settings and services scheduling
Use scheduled services to control how calls are answered in off-hours (Ringing Groups), how calls
are routed at various times of the day, and how restrictions are applied on lines and telephones at
specific times of the day.
The following paths indicate where to access scheduled services in Element Manager and through
Telset Administration:
• Element Manager: Configuration > Telephony > Scheduled Services
• Telset interface: **CONFIG > Services
The Scheduled Services - Settings and Schedules panel has three distinct areas for configuration.
• The table in the top frame allows you to determine which schedules are active for the system
for routing, restriction, and ringing schedules.
• The table in the top frame to the right sets the time periods within each schedule for each day
of the week.
• The table in the bottom frame allows you to rename schedules.
Click one of the following links to connect with the type of information you want to view:
Schedules are activated and deactivated through control telephones. Refer to “Control telephone”
on page 225.
Panels Related panels or tasks Feature
“Configuring scheduled service”
on page 31
Alternate routes for routing
schedules in the BCM 4.0
Networking Configuration Guide
(N0060606)
“Control telephone” on page 225
“Configuring schedule names and
timers” on page 30
“Ring Groups - Line Settings tab”
on page 97
Restriction filters in the BCM 4.0
Networking Configuration Guide
(N0060606)
“Restrictions (Line and Remote) in
the BCM 4.0 Networking
Configuration Guide (N0060606)
“Restrictions main tab” on page 65
Class of Service table in the
BCM 4.0 Networking Configuration
Guide (N0060606)
Click the navigation tree heading to access general information about Ring Group management.