Filter
Top Products
284 Chapter 30 Configuring the music source
N0060600N0060600
Frames per packet Field not required.
Streaming Server
Note: A third party application that supports audio streaming is required. It must adhere to the RTP protocol and
support one of the following codecs: G.711, G.729, or G.723.
Server Enter the IP Address of the network device that contains the music source.
Server RTP port Enter the source port number to use when connecting to the network device that contains
the music source.
Stream Type Select the codec of the audio file provided by the network device.
Frames per packet Enter the frames per packet to be received from the network device.
RTP port on BCM Enter destination port number used on the BCM for sending out music to users.
If you choose Audio Jack as the Music Source, there is no further configuration required
for the Music Source.
Table 81 Music parameters (Sheet 2 of 2)
Setting Definition