Filter
Top Products
28 Chapter 3 System Software
N0060600N0060600
4 In the bottom frame, ensure that the Time zone is correct for the location of the local system.
5 If Trunk was selected in the Date and Time Source drop-down list, enter the year in the Yea r
field.
Setting clock control to local system
If you want the clock to be controlled locally:
1 Ensure that Clock Control Type is set to local.
2 In the bottom frame:
• In the Time Zone field, select the Time zone the system uses.
• In the Date field, enter the month, day and year.
• In the Time field, enter the hours and minutes and time of day.
• In the Daylight Savings Time field, choose whether the system updates the time twice a
year for daylight savings time.
Note: Only time and date info are updated when NTP and Trunk
settings are selected. Year information is not updated. You also have full
control over time and date settings using telset admin even if NTP or
Trunk are selected. Any setting applied through telset admin are
over-written by the external source if NTP or Trunk are selected. Time
zones need to be set for software updates to be applied.