Filter
Top Products
190 Chapter 23 Telephony features
N0060600N0060600
Programming distinctive ringing
You can program a line or a telephone to use a distinctive ring, when alerting at a telephone. Ring
types are ordered in a hierarchy. Hence, an incoming call, on a line with a higher priority ring than
that assigned to the telephone, uses the line distinctive ring. If the telephone has the higher ring
priority, the call uses the ring defined by the telephone.
Distinctive ring can also be defined for hunt group calls.
• Using the system:
For lines – Configuration >Telephony > Lines > Active Sets > Preferences tab
For DN records – Configuration > Telephony > Sets > Active Sets > Top panel -
Capabilities and Preferences tab > Bottom panel - Preferences tab
For hunt groups: Configuration > Telephony > Hunt groups
• Using the telset interface:
Lines > Trunk/line data > Distinct ring
Terminals and Sets > Capabilities > Distinct ring
System progrming > Hunt groups > Distinct ring
• At the telephone (for set distinct ring, only):
1 Press FEATURE *6.
2 Enter the ring type number (1 to 4).
3 Press HOLD.
Ring volume
Adjust the volume of your telephone any time it rings.
Press FEATURE *80 until the ring is at the volume you want.
Auxiliary ringer
This optional device can be connected through the RJ21 connection to your system. The auxiliary
ringer is suited to locations that require loud ringing bells or horns (for example, factories or
construction sites).
Enabling or disabling the feature for:
• lines — Element Manager: Configuration > Telephony > Lines > Preferences - bottom
panel
Note: There are only four distinct ring patterns in the system.