Filter
Top Products
85
BCM 4.0 Device Configuration Guide
Chapter 10
Configuring system speed dial numbers
System speed dial codes are assigned to external numbers. You can use then the two- or three-digit
code to dial the number, or assign the code to a memory button, instead of dialing the entire string.
These assignments are the same for all users in the system.
The following paths indicate where to access system speed dial programming in Element Manager
and through Telset Administration:
• Element Manager: Configuration > Telephony > Global Settings > System Speed Dial
• Telset interface: **CONFIG > System Speed dials
System Speed Dial panel
This panel allows you to determine the number of speed dial codes on the system, and what each
code dials.
Panels/Subpanels Configuring features and tasks
“System Speed Dial panel” on page 85 “Using alpha tagging for name display (incoming)” in the
BCM 4.0 Networking Configuration Guide (N0060606)
“Capabilities and Preferences - Button Programming tab” on
page 58
“Programming memory buttons” on page 222
“Speed dialing” on page 221
Click the navigation tree heading to access general information about Hospitality services.