Filter
Top Products
Chapter 21 Default memory button programming for telephones 169
BCM 4.0 Device Configuration Guide
Figure 61 IP Phone 1140E
Table 4 IP Phone 1120E and IP Phone 1140E buttons (Sheet 1 of 3)
Button Description
Soft keys are located below the display area. The LCD label
above each key changes based on the active feature.
The keys on either side of the display area are user-defined
feature keys, with labels on the LCD display.
A steady LCD light beside a line (DN) key indicates that the line
is active. A flashing LCD light indicates the line is on hold or the
feature is being programmed.
A steady LCD light beside a feature key indicates that the feature
is active. A flashing LCD light indicates that the feature is being
programmed.
Use the Volume control buttons to adjust the volume of the
ringer, handset, headset, speaker, and the Handsfree feature.
Press the top button to increase the volume, and press the
bottom button to decrease volume.
Handsfree key
Handset
User-defined feature keys
High-resolution
graphical display screen
Navigation keys
Services key
Copy key
Quit/Stop key
Message/Inbox key
Shift/Outbox key
Directory key
Hold key
Expand to PC key
Headset key
Goodbye key
Volume control
Dialpad
Soft keys
Speaker
*Note: If supported by your server, the Feature Status Lamp provides a user-defined alert.
Contact your system administrator to find out if this feature is available for you.
Mute key
Feature Status Lamp*
Visual Alerter/Message Waiting
indicator
Fwd
GrpCl Z
(Volume +)
(Volume -)