Filter
Top Products
48 Chapter 6 DN records parameters
N0060600N0060600
Line Access - Line Pool Access tab
Use the Line Pool Access tab to add line pools to a telephone record.
Figure 10 Line Access - Line Pool Access tab
These shared pools of lines enables many users to use fewer lines for connections, where dedicated
lines are not practical or not desirable. If all lines in the pool are taken, the user receives a busy
signal.
Some trunks, such as PRI and VoIP, must be put into line pools. For outgoing calls, the line pools
are assigned to the telephones that call out over these trunks.
All lines except PRI and BRI ETSI-QSIG lines are configured in line pools A to O. PRI and BRI
ETSI-QSIG lines can be configured into line pools BLOC-A to BLOC-F.
Add To add a line to a telephone:
1. On the System DNs table (Line Access tab), choose the DN record where you want to
add lines.
2. Under the Assigned Lines table in the bottom panel, click Add.
3. Enter a line number in the dialog box.
4. Click OK to save the line to the list.
Delete 1. On the System DNs table (Line access tab), choose the DN record where you want to
delete lines.
2. On the Assigned Lines table in the bottom panel, select a line you want to delete.
3. Click Delete.
4. Click OK to confirm the selection.
Table 10 Telephone line assignment fields (Sheet 3 of 3)
Attribute Values Description