Filter
Top Products
Chapter 27 Display prompts and messages 235
BCM 4.0 Device Configuration Guide
OTHERLEAVEEXIT
Silent monitor: When you join a monitored call, you can choose to:
– move to another Hunt group member (OTHER
)
– mute your telephone out of the current conversation (this does not
disconnect silent monitoring) (JOIN
)
– exit the silent monitoring (EXIT
)
Access denied
Programming is busy, or the feature you are trying to use is not compatible with the
configuration of the telephone or line.
Silent monitor: You tried to start a monitoring session on a telephone that does not
support the feature.
Already joined
Your telephone is connected to the telephone you are trying to call. Check your
active line buttons, and return to that call.
Pickup group: You are connected to the telephone that made the call you are trying
to answer. This display appears if you are on a call to a colleague, your colleague
dials the number of a telephone in your pickup group, and you try to answer that call.
Already parked
Call park: The person you were talking to has parked your call. You cannot park the
same call.
Autodial full
Auto dial: The memory allocated to auto dial numbers in your system is full.
Button erased
Auto dial: While programming external auto dial, you erase the button by pressing
HOLD or
OK before entering any digits.
Call NNN?
YES NO
You have received a Ring Again offer from a call to an internal telephone. Press the
flashing internal line button or
YES to call the number again. On 7000 and 7100
digital phones, just lift the handset. Otherwise, press
NO or wait 30 seconds for Ring
Again to expire.
Calling NNN
PRIORITY LATER
Wait for the telephone to be answered. If no one answers, press LATER to use the
Ring Again feature or Message feature, or press
PRIORITY to make a priority call.
Priority Call: You initiate the Priority call transfer to this local.
Call blocked
Priority call: You tried to place a priority call to another telephone in your system. The
person you called has blocked your call.
Camped: NNN
CALLBCK
The person at extension NNN has not answered the camped call. The call has come
back to you. Press the line button or
CALLBCK to reconnect to the call. On 7000 and
7100 digital phones, lift the handset to reconnect to the call.
Camp denied
Camp-on: You have tried to camp an internal call. You can camp external calls only.
Camp to:
CANCL
Camp-on: Dial the number of the internal telephone to which you want to camp the
call.
Cancel denied
Message: You entered an invalid number when trying to cancel a message.
Can't ring again
You cannot use Ring Again on your current call. You can use Ring Again while you
have a busy signal on an internal call or line pool request, or while an internal call is
ringing.
Cleared>LINENAM
NEXT
Message: You cleared an external message from your message waiting list. The
message exists in your message center until you erase it there.
CLI COPY INCOMP
You attempted to allow CLI for an assigned line for more than 30 telephones.
Display prompt Description of error or action