Filter
Top Products
206 Chapter 24 Feature configuration: Answering calls
N0060600N0060600
Centralized voice mail, Meridian: If your system is part of a private network that uses the Meridian
call attendant as part of a centralized voice mail system, the attendant can use camp-on to camp a
call on any telephone in any system on the network.
Setting the timer
The system camps a call for a specified length of time before it returns the call to the original
answering telephone. Set the timer under Configuration > Telephony > Global Settings >
Feature Settings.
To use Camp-on
1 Press FEATURE 82.
2 Dial the extension of the receiving telephone.
Call Park
You can park a call on the system that can be accessed from any telephone on the system.
Calls are parked on a three-digit park code. The first digit of the code is a system access code. The
last two digits range from 01 to 25. (FEATURE 74)
You can also set a delay period for when the call returns to the telephone from which it was
parked; under Configuration > Telephony > Global Settings > Feature Settings. You can also
determine the order used to assign the codes (Park mode).
Setting up the call park access code
The park prefix must be unique from any other access code (Default: 1).
Configuration > Telephony > Dialing Plan > General (Access Codes subpanel)
Setting up park timeout
Determine how many minutes the system waits between parking a call and returning the call to the
original answering telephone.
Configuration > Telephony > Global Settings > Feature Settings > Timers subpanel
Determining the order in which call park codes are assigned to calls
Configuration > Telephony > Global Settings > Feature Settings > Park mode
To park a call
1 Enter FEATURE 74.
2 The display shows a three-digit retrieval code (*X01-X24).
3 Note the code, and inform other users about the parked call.