Filter
Top Products
290 Chapter 30 Configuring the music source
N0060600N0060600
To select and play a sound file
• click Next
• click Previous
• click the sound file you want to play
To play a sound file, click the Play button.
To stop a sound file, click the Pause button.
To pause a sound file, click the Pause button.
Configuring a Network Device to be the IP Music Source
To configure a Network Device to be the IP Music source
1 Click Configuration > Applications > Music.
The Music panel appears.
2 Select the Streaming Server from the Music Source list.
3 Configure the Streaming Server section of the Music panel. Table 7 lists the fields and the
associated parameters.
Play - Play selected sound file
Pause - Pause play for selected sound file
Note: A third party application that supports audio streaming is required. It
must adhere to the RTP protocol and support one of the following codecs:
G.711, G.729, or G.723.
Table 7 Network Device parameters (Sheet 1 of 2)
Attribute Value Description
Server <IP address> Enter the IP address of the music source.
Server RTP Port Default port: 2216 Enter the number of the source port used for the music source.
This is the port the BCM uses to receive music from the music
source.
Table 82 BcmAmp Player button actions
Button Explanation