Filter
Top Products
Chapter 18 Configuring telephones: Digital telephones 133
BCM 4.0 Device Configuration Guide
2 Set Lock: Determine how much programming the user is able to perform at their telephone.
(None, Partial, Full)
Refer to “Restrictions main tab” on page 65 for a description of what is allowed for each level.
3 Allow Last Number: Select the check box if you want to allow Last-number redial for numbers
dialed from the telephone.
4 Allow Saved Number: Select the check box if you want to allow redialing a saved number.
5 Allow Link: Select this check box only for analog telephones.
Set restrictions
Assign restriction filters for the schedules that will affect this telephone.
Programming reference:
• “Restrictions - Set Restrictions tab” on page 66
• Restriction filters
To set restrictions
1 Select the field you want to change.
2 Enter the restriction filter appropriate for the schedule. You will always need a filter specified
for the Normal schedule.
3 Repeat for each schedule.
Line/Set restrictions
Assign restriction filters for the schedules that will affect the lines assigned to this telephone.
Programming reference:
• “Restrictions - Line/Set Restrictions tab” on page 67
• Restriction filters
To set line/set restrictions
1 Select the line you want to modify.
2 Select the field you want to modify on that line.
3 Enter the restriction filter appropriate for the schedule. You always need a filter specified for
the Normal schedule.
4 Repeat for each line.