Filter
Top Products
Chapter 6 DN records parameters 57
BCM 4.0 Device Configuration Guide
Contrast 1 through 9 Adjust the contrast of the display.
Default: 4
Ring type 1, 2, 3, or 4 Select a distinctive ring pattern type for the telephone.
Default: 1
Distinct rings in use <read-only> This field indicates the distinct ring patterns, if any, are currently in
effect on any lines, telephones, or Hunt groups on the system.
Refer to the Warning below.
Warning:
If you assign a distinctive ring pattern to a telephone, and that distinctive ring pattern has
already been assigned to a line, all lines with that ring pattern will be reset to None.
If you assign a distinctive ring pattern to a line, and that distinctive ring pattern has already
been assigned to a telephone, all telephones with that ring pattern are reset to pattern 1.
You also can assign a distinctive ring pattern to a Hunt group.
Aux. ringer <check box> Determine whether an auxiliary ringer (if installed) rings for
incoming calls at this telephone.
Default: Cleared
Call log options No autologging
No one answered
Unanswered by me
Log all calls
Select how you want the telephone to handle logging calls.
No autologging: No calls are logged automatically.
No one answered: Unanswered calls are logged.
Unanswered by me: Unanswered calls are logged.
Log all calls: All calls are noted in the call log.
Also refer to “Call log” on page 210.
Default: No one answered
Log space <numeric> Allocate a number of Call log spaces from a system-wide pool of
spaces to the telephone. Also refer to “Setting call log space for the
system” on page 210.
Log space <numeric> Allocate a number of Call log spaces form a system-wide pool or
spaces to the telephone. Also refer to “Setting call log space for the
system” on page 210.
Available log space <read-only> This setting indicates the total amount of space available for call
logging on the system.
Reset Call Log
Password
<button> This button resets the password for the call log if users forget their
password.
Hotline type None
Internal
External
This feature allows you to define a telephone number that
automatically dials when you lift the handset or press the Handsfree
button, on a telephone.
Default: None
• Internal DN:*
Direct dial set
Define the internal telephone you want to access.
DN:* The DN of the telephone that is automatically dialed when the
user lifts the handset.
Direct dial set: Automatically dials a telephone on the system
defined as a direct dial telephone (direct dial access code).
Note: If the direct dial telephone is on a remote node of the
network, ensure that the correct line pools are assigned to the
telephone to properly route the call.
Table 15 Capabilities and Preferences - Preferences panel fields (Sheet 2 of 3)
Setting Values Description