Filter
Top Products
78 Chapter 8 Global telephony settings
N0060600N0060600
Advanced Feature Settings
The following path indicates where to access advanced feature settings in Element Manager:
• Element Manager: Configuration > Telephony > Global Settings > Advanced Feature
Settings
The Advanced Feature Settings panel enables administrators to modify the following features:
• System Wide Call Appearances Control
• “ONN Blocking (North American systems)” on page 80
• “Silent Monitor” on page 81
• “Reset logs” on page 82
System Wide Call Appearances Control
There are a number of ways that calls can be parked on System Wide Call Appearance (SWCA)
assignments. Use this panel to set the system feature function.
Figure 27 System Wide Call Appearances controls
Table 27 describes the fields on this panel.
Table 27 SWCA controls (Sheet 1 of 2)
Attribute/Value Description
Auto-associate SWCA key to call
Manually - while parked
Manually - life of call
Automatically - life of call
Select how a call is parked on a SWCA key.
Default: Manually - while parked.
Manually - while parked: The user either presses a free SWCA key on the
telephone, or dials the feature code for a free key. Once the call is retrieved, it is
unassigned from the SWCA key.
Manually - life of call: The user either presses a free SWCA key on the telephone, or
dials the feature code for a free key. When the call is retrieved, it remains assigned
to the SWCA key. The key is freed only after the call is terminated.
Automatically - life of call: When a call is answered, it is automatically assigned to a
free SWCA key, starting with the lowest available number. When the call is
retrieved, it remains assigned to the SWCA key. The key is freed when the call is
terminated.
Include I/C calls when auto-associating
<check box>
Decide if you want intercom calls to automatically park on
SWCA keys.