Oki 9400 Printer User Manual


 
TRAY4 MEDIAWEIGHT LIGHT, MEDIUM LIGHT, MEDIUM, MEDIUM HEAVY,
HEAVY, ULTRA HEAVY
TRAY5 MEDIATYPE PLAIN, LETTERHEAD, TRANSPARENCY, BOND,
RECYCLED, CARD STOCK, ROUGH
TRAY5 MEDIAWEIGHT LIGHT, MEDIUM LIGHT, MEDIUM, MEDIUM HEAVY,
HEAVY, ULTRA HEAVY
MP TRAY PAPERSIZE
*LEF = Long Edge Feed
A3 Nobi, A3 Wide, A3, A4 SHORT EDGE, A4 LONG EDGE,
A5, A6, B4, B5 SHORT EDGE, B5 LONG EDGE, LEGAL14,
LEGAL13.5, LEGAL13, TABLOID EXTRA, TABLOID,
LETTER SHORT EDGE, LETTER LONG EDGE,
EXECUTIVE, CUSTOM, COM-9 ENVELOPE LEF*, COM-
10 ENVELOPE LEF*, MONARCH ENVELOP LEF*, DL
ENVELOPE LEF*, C5 ENVELOPE LEF*, C4 ENVELOPE
LEF*
MP TRAY MEDIATYPE PLAIN, LETTERHEAD, TRANSPARENCY, LABELS,
BOND, RECYCLED, CARD STOCK, ROUGH
MP TRAY MEDIAWEIGHT LIGHT, MEDIUM LIGHT, MEDIUM, MEDIUM HEAVY,
HEAVY, ULTRA HEAVY
UNIT OF MEASURE INCH, MILLIMETER
X DIMENSION 3.5 to 12.9 in increments of 0.1-INCH. Default = 8.5 INCH.
Y DIMENSION 5.8 to 35.5 INCH in increments of 0.1-INCH. Default = 11
INCH.
TRAY1 MEDIATYPE
(TRAY2 MEDIATYPE, TRAY3 MEDIATYPE, TRAY4 MEDIATYPE, TRAY5 MEDIATYPE)
Use only the TRAY1 Mediatype setting to change the default media to transparencies. Select
TRANSPARENCY.
Note: Trays 2 through 5 only appear if the optional Auxiliary Trays and/or the optional High
Capacity Feeder are installed on the printer. These trays can not be used with transparencies.
TRAY1 MEDIAWEIGHT
TRAY2 MEDIAWEIGHT
TRAY3 MEDIAWEIGHT
TRAY4 MEDIAWEIGHT
TRAY5 MEDIAWEIGHT
Use these settings to set the default to print media other than transparencies (e.g., labels, thick
paper, etc.).
Note: Trays 2 through 5 only appear if the optional Auxiliary Trays and/or the optional High
Capacity Feeder are installed on the printer.
121