- Letter (long or short edge)
- Legal-14
- Legal-13.5
- Legal-13
- Tabloid
- Tabloid Extra
- Executive
- A3
- A3 Wide
- A4 (long or short edge)
- A5
- B4
- B5 (long or short edge).
Note: If you experience significant curling when printing in the duplex mode and you're using
20 or 24-lb. paper, switch to 28-lb. paper.
Duplex Printing from a Software Application: Windows Me
Note: If you haven't already done so, before attempting duplex printing you must activate the
duplex unit in the driver (PCL, PostScript).
Duplex Printing: Windows Me PCL
1. Open the document in your software application.
2. Click File → Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PCL driver is selected, then click Properties (or your
application's equivalent).
The OKI Properties dialog box appears.
4. Click the Layout tab, then select Long edge (
) or Short edge ( ) binding under 2-sided
printing.
5. Click OK and print the document.
Duplex Printing: Windows Me PS
1. Open the document in your software application.
2. Click File → Print.
The Print dialog box appears.
3. Make sure the OKI C9200 or C9400 PostScript driver is selected, then click Properties
(or your application's equivalent).
The OKI PS Properties dialog box appears.
4. Click the Layout tab.
5. Under 2-sided printings, click your selection of Flip on long edge (
) or Flip on short
edge (
) from the drop-down list.
6. Click OK and print the document.
176