To perform a PS Flash Resize:
1. Press MENU repeatedly until MEMORY MENU appears on the display.
2. Press ITEM + several times until
PS FLASH RESIZE
1.5MB *
appears on the display.
3. Press VALUE + repeatedly until the new memory size you wish to use appears on the
second line of the display.
4. Press SELECT.
ARE YOU SURE?
YES=SELECT/NO=CANCEL
appears on the display.
5. Press SELECT.
EXECUTE NOW?
YES=SELECT/NO=CANCEL
appears on the display.
6. Press SELECT.
PLEASE POWER OFF
SHUTDOWN COMPLETED
appears on the display.
7. Shut the printer off, then turn it back on again.
Note:
During the initialization process,
FLASH MEMORY FORMAT
appears on the display while the Flash memory is being reconfigured to the new memory
value.
Network Menu
Note: These items are normally set by the System Administrator.
This menu appears only on printers equipped with a network print server.
Sets the network parameters. English only.
For more information on the OkiLAN
®
6200e print server, see the on-line OkiLAN 6200e User's
Guide.
Defaults are red bold print.
Item (see descriptions below) Values
TCP/IP ENABLE, DISABLE
NETWARE ENABLE, DISABLE
124