Filter
Top Products
PARALLEL ENABLE
BI-DIRECTION ENABLE
ECP ENABLE
ACK WIDTH NARROW
ACK/BUSY TIMING ACK IN BUSY
I-PRIME DISABLE
Changing Parallel Port Menu Settings
To change parallel port menu settings:
1. Press MENU repeatedly until PARALLEL MENU appears on the display.
2. Press ITEM (+ or -) repeatedly until the parameter you wish to change appears on the
display (e.g., BI-DIRECTION).
3. Press VALUE (+ or -) repeatedly until the setting you wish to engage appears on the
display (e.g., DISABLE).
4. Press SELECT to engage that setting (an Asterisk will appear next to the new setting).
5. Press ON LINE to save the setting and exit the menu.
ECP Mode
The parallel port supports IEEE-1284 bidirectional mode and ECP mode. If your computer's
parallel port is not compatible with one of these modes, the printer may not print at all or it may
print corrupted data.
To correct for this, enter the printer's Parallel Menu and change the ECP setting to Disable.
Changing the ECP Menu Setting
To change ECP setting:
433