Filter
Top Products
then click Yes under Change 'Collate' Setting.
6. Click OK and print the document.
Setting Collate as the Default: Windows NT 4.0 PS
To set collate as the default in the Windows NT 4.0 PostScript driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PostScript printer icon and click Document Default.
The OKI Default dialog box appears.
3. Under Paper/Output, click Copy Count and enter the number of copies to be printed
under Change 'Copy Count' Setting:
4. Click Collate, then click Yes under Change 'Collate' Setting:
5. Click OK and close the Printers dialog box.
Custom Page Sizes: Windows NT 4.0
General Information
To print custom page sizes, you must:
Use the Multi-Purpose Tray
Use the Straight-Through Exit path
Use a Custom Page Size defined in the printer driver:
Width range 3 to 12.9 inches (76 to 328 mm)
Length range 5 to 18 inches (127 to 457 mm)
Custom Page Sizes: Windows NT 4.0 PCL Driver
Creating and Storing a Custom Page Size: Windows NT 4.0 PCL
Note: You can save up to 32 Custom Page Sizes.
To set up a Custom Page Size in the Windows NT 4.0 PCL driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PCL printer icon, then click Document Defaults.
The OKI Default dialog box appears.
3. Click Custom size.
The Custom size dialog box appears:
209