5. Click OK and proceed to print the job.
Setting Collate as the Default: Windows 98/95 PS
To set collate as the default in the Windows 98 & 95 PostScript driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PostScript printer icon, then click Properties.
The OKI Properties dialog box appears.
3. Click the Paper tab.
4. Under Copies, enter the number of required copies and click Collate.
5. Click OK and close the Printers dialog box.
Custom Page Sizes: Windows 98 & 95
General Information
To print custom page sizes, you must:
Use the Multi-Purpose Tray
Use the Straight-Through Exit path
Use a Custom Page Size defined in the printer driver:
Width range 3 to 12.9 inches (76 to 328 mm)
Length range 5 to 18 inches (127 to 457 mm)
Custom Page Sizes: Windows 98/95 PCL Driver
Note: Up to 32 custom paper sizes can be defined and stored.
Setting Up a Custom Page Size: Windows 98/95 PCL
To set up a Custom Page Size in the Windows 98 & 95 PCL driver:
1. Click Start → Settings → Printers.
The Printers dialog box appears.
2. Right click the OKI C9200 or C9400 PCL printer icon, then click Properties.
The OKI Properties dialog box appears.
3. Click the Paper tab, then click Custom Size.
The Custom size dialog box appears.
189